2Sorry, but the full screen editor is not installedESorry, the full screen message editor is only available to ANSI users=The full screen message editor will be used to enter messages.The line editor will be used to enter messagesU
4Sorry, ANSI graphics are not available at this speed
ANSI/Colour graphics now active%ANSI/Colour graphics will NOT be used5The full screen message editor has also been disabledU
Page Pausing ON
Page Pausing OFFU
Screen clear codes WILL be sent#Screen clear codes will NOT be sentU
(Choose a user (enter the line number) : &Sorry, there isn't anyone on that line
Sorry, but
doesn't wish to be disturbed.$Sysop Override : Send anyway [Y/n]?
Message to
, maximum 1 line
Aborted.
Processing...
**MESSAGE** from on line
Press [Return] to continue:
Sent on-line message to
(Line
SentU
How many lines per screen page (10-66)? *
Please enter a number between 10 and 66.
Screen length changed to
lines.U
PASSWORD
Enter your password to use: &
Your password must contain at least
characters! Try again..%
Please Re-Enter for verification : .
Passwords do not match! Password unchanged..
Password change successfulU
>T%&:
>T%&:
Please enter your new address (City, State): U
Current Time :
Current Date :
Connect Time :
minutes
Time Used Today :
Time Remaining Today :
Daily Time Limit :
Press [Enter] to continue:
7Enter Username search string or [Enter] for all users: Q
Name Location LastOn Calls Ratio
Press [Enter] to continue:U
"Sysop paged (outside paging hours)
NOTAVAIL
0Sorry, but you may only page for a chat between
and
Sysop paged (too many times)
MAXPAGE$Sorry, you may only page for a chat
times per call.
Press [Return] to continue:
Sysop Page
[C] To break in for a chat
[A] To terminate the page
PAGE.RA
WAIT&Sysop paged (aborted at local console)
PAGEABRT0Sorry, but the sysop is not currently available.
Press [Enter] to continue:
Sysop paged (chatted with user)
PAGED
Sysop paged (no response)U
>E#Ata
$User requested to terminate the call
GOODBYE
DOS shell : U
Data File Not Present
0123456789
Press [Return] to continue:U
version ?Copyright (C) 1990 by Continental Software, all rights reserved3Compiled under Borland's Turbo Pascal version 5.5
HProtocol Engine by Joaquim Homrighausen used for file transfer protocols
FOSSIL :
Registered to :
Press [Return] to continue:U
HotKeys active
HotKeys disabledU
"Enter message area(s) to toggle : U
SDQEWould you like to <S>elect, <D>e-Select all message areas or <Q>uit?
?Verify that you would like to turn all message areas ON [Y/n]: @Verify that you would like to turn all message areas OFF [Y/n]: U
Callers On-Line to BName Line BaudRate Location
Press [Return] to continue:U
Todays Callers to EName Line BaudRate LogOn LogOff Times Location
Press [Return] to continue:U
File To View :
#Sorry, couldn't locate that file...
Press [Return] to continue:U
ZIP*Error in archive or unknown archive format
0Enter the File Name of the Archive to examine :
LZH>Sorry, this function currently supports only ZIP and LZH files
Could not locate that file!
Listing Of Archive 4File Name Compressed Uncompressed Ratio
Press [Return] to continue:U
0 5 R f p x }
01-01-801Search for files new since your last call [Y/n]?
$Show all files newer than MM-DD-YY:
0File Search by Date; Press P to Pause, S to Stop*Search Config File not installed, aborting FILES.BBS
)Search Ended, Press [Return] to continue:U
Enter file name to find :
0File Search by Name; Press P to Pause, S to Stop
*Search Config File not installed, aborting FILES.BBS
)Search Ended, Press [Return] to continue:U
"Enter keyword to use for search :
3File Search by Keyword; Press P to Pause, S to Stop
*Search Config File not installed, aborting FILES.BBS
)Search Ended, Press [Return] to continue:U
XFERTIME
4Sorry, file transfers are not permitted at this time
XFERBAUD5Sorry, file transfers are not permitted at this speed
No files to send!JSorry, but the protocol you have selected does not support batch transfers;Sorry, but this download would exceed your daily time limit
TODAYK+Sorry, but this download would exceed your
k daily limit
RATIO
:1 ratio limit
RATIOK
Files To Transfer :
Transfer Size :
Transfer Time :
minutes at
Baud=Start receiving now, or press <Ctrl-X> several times to abort
Download Progress
Download [
File(s) sentU
A W h
&File to Download (Full Path & Name) :
No files to send!JSorry, but the protocol you have selected does not support batch transfers
Files To Transfer :
Transfer Size :
Transfer Time :
minutes at
Baud=Start receiving now, or press <Ctrl-X> several times to abort
Download Progress
Download [
File(s) sentU
Sorry, incorrect*! Attempted to access passworded file area
XFERTIME
4Sorry, file transfers are not permitted at this time
XFERBAUD5Sorry, file transfers are not permitted at this speed
File(s) to Download :
No files to send!JSorry, but the protocol you have selected does not support batch transfers;Sorry, but this download would exceed your daily time limit
TODAYK+Sorry, but this download would exceed your
k daily limit
RATIO
:1 ratio limit
RATIOK
Files To Transfer :
Transfer Size :
Transfer Time :
minutes at
Baud=Start receiving now, or press <Ctrl-X> several times to abort
Download Progress
Download [
File(s) SentU
- 2 < A S ] g l
Activating External Protocol (Download Mode)
Port
Baud
Time
Processing external protocol log
Download [
bytes)U
Transfer cancelled from console
Timeout, error #
NAK, error #$Receiver didn't acknowledge header..
Receiver didn't request headerU
Ending batch session
Sending file data
Unable to open
File is a device
Transfer cancelled by remote
Disk read error
NAK ( ) error # Timeout (
), error #
Transfer cancelled from console/Waiting for receiver to acknowledge end of file
End of file not acknowledgedU
b$C4
P%@Fpg`
RwbVr
ftGd$T
uJTZ7j
ld\EL
n6~UNt^
G s
Upload [
Drive Space :
bytes
Protocol :
/There is not enough free space for your upload!;Start sending now, or press <Ctrl-X> several times to abort
Upload Progress
File to upload :
File(s) Received
You have been granted an extra
minute(s):Begin description with a "/" if file is for the sysop only FILES.BBS
Please describe
PVTFILES.LOG
File :
Date :
Uploader :
Description : U
E W u
!System contains messages ranging
.2Enter number of message to delete, [Enter]=Quit :
There is no message #
in this area
Deleting message # Message #
deleted
You cannot delete that message.U
1ATATIME7Sorry, you may only log on to one line at any one time!'! Attempted to log on to multiple linesU
NOTFOUND4
Your name was not located in the system User File.
Name Entered :
Did you enter your name correctly [Y/n]?
PRIVATE
Sorry, this system is private..User disconnected after private system message
TRASHCAN.CTL6! Name entered is unacceptable, Trashcan message given
TRASHCAN2 Sorry, that name is not acceptable on this system
NEWUSER11
Would you like ANSI colour and graphics [Y/n]?
Y5Do you want to use the ANSI full-screen editor [Y/n] 'Would you like hot-keyed menus [Y/n] ? B
How many lines does your display have (10-66, 24 recommended) : 8
Would you like to pause after each screen page [Y/n]? 6
Do you want screen clearing codes to be sent [Y/n]? 9
Enter the suburb, city and state you are calling from: ,
Please enter your home/voice phone number:/
Please enter your business/data phone number:
PASSWORD
xxx &
Enter your password to use (minimum
chars) : %
Please re-enter for verification : %
Passwords do not match! Try again..;
Did you enter all the above information correctly [Y/n]? .Scanning phone numbers, please wait a moment..
PHONENUM.CTLBWARNING: Unacceptable voice phone number entered, notifying sysop.1! Entered an unacceptable Home/Voice phone number?WARNING: Duplicate voice phone number entered, notifying sysop..! Entered the same Home/Voice phone number as
NEWUSER2
NEWUSERU
>T%&:
DUMMY
TOOSLOW6
Sorry, but you cannot use this system at this speed.
NO300@
Sorry, 300 baud callers are not permitted to call at this time
Please enter your full name:
And your last name? .You must enter both your first and last names!-
** Sysop Remote Access Has Been Disabled **5! Sysop tried to log-on remotely and was disconnected
Scanning user file ...
, RA line #
on-line at
baud
Name not in user file!
Fast logon in local mode
on-line locally (fast logon)
Password:
Incorrect password :
Incorrect, try again.
Access denied!7! Exceeded maximum password attempts, user disconnected
Completed new-user procedure
LOCKOUTFSorry, but your access to this system has been suspended by the sysop.'User disconnected after lockout message
Logging user back on-line
Logging
back on-line
none Event at
, time adjusted downwards
TIMEWARN
System Event in minutes,%your time limit has been adjusted to minutes.
Security level
minutes remaining
RESET
WELCOME
WELCOME1
Check for waiting mail [Y/n]?
System forced a password change
EXPIRED
"Your current password has expired!
?For security purposes, you are required to change your password
every
times you call
Please enter the new password you wish to use : .
You can't use the same password! Try again..%
You password must contain at least
characters2
Please enter your new password to verify : %
Passwords do not match! Try again..U
>T%&;
>T%&:
>T%&:
% 0 E O W
" , 6 ; P Z c |
!$!)!3!8!=!E!k!
"*"I"S"\"q"{"
#=#G#Q#V#_#t#~#
$1$C$H$R$W$i$s$}$
%%%3%B%T%Y%w%
&,&;&M&R&a&~&0
Security Watchdog activated, notifying user..! Watchdog : User notified of password attempt
WATCHDOG.MSG
! Unable to open WATCHDOG.MSG Incorrect password logon attemptU
Security level altered to U
Flag
set
completed questionnaire at
***U
Questionnaire
initiated:
Questionnaire completedU
PWDTRASH.CTLC
Sorry, this password is unacceptable. Please try something else..F
You must select a password that is less similar to your current one!U
Checking your mail-box ...
(You have no new mail in your mail-box.
You have the following mail : 1 message messages
YRSKQMN
Would you like to read this mail now? [Y/n] :
Yes Scan mail
QuickScan mailA
Are you sure you wish to kill all mail addressed to you [y/N]?